I F*cked up and I need help.
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 100%

    If there is docker image for what you need, use docker image.

    If not I would recommend systemd-nspawn, it's chroot but can run systemd init, with efforts you can run GUI applications from it too., wiping that is just sudo rm -rf.

    2
  • What's a good alternative to Gmail?
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 100%

    Also using PurelyMail, tt's the cheapest non-free email service I can find.

    It passes email delivery tests, setup SPF, DKIM and DMARC easily without issue.

    The downside is that it's basically one man handling whole this service, but I assume this service has been fully automated because the margin of profit is so low.

    5
  • What helps people get comfortable on the command line?
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 92%

    I am using ZSH, that function that allows you to type part of the command and then do UP key to find previous command starts with same prefix is killer function for me.

    (I don't know if this function is added by oh-my-zsh or not.)

    11
  • How to figure out the exact driver needed for the WiFi card to install it on Linux?
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 100%

    On Ubuntu 22.04 based distro, you can try install HWE (hardware enablement) kernels but you need a phone that can share WIFI/mobile connection through USB cable.

    sudo apt update; sudo apt install linux-generic-hwe-22.04

    2
  • can you recommend me anime to watch?
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 100%

    All the series I recommends below are complete. (tells story from start to end)

    • Tengen Toppa Gurren Lagann (There are TV series and movies that both tell similar story but not the same, TV series have darker story)

    • Kill la Kill

    • Blast of Tempest

    • Assassination Classroom

    • Back Arrow (first half of series is meh but it becomes better and better)

    • Mob psycho 100

    • Summer Time Render

    3
  • As requested: https://old.lemmy.world (MLMYM)
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 100%

    Don't know if this bug is reported upstream or not.

    My default listing is "subscribed", if I go to "Top All" and click next page button, I get "Top Sucscribed, page 2". (my current listing doesn't last)

    1
  • what's a reasonable sort for lemmy?
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 100%

    I browse lemmy in these orders:

    1. Communities I subscribed, sort by new.

    2. Active All, I've blocked a few meme communities so I don't see them much.

    3. Top 6 hours All.

    4. Top 1 hour All.

    6
  • Seedbox recommendations (thinking of switching)
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 100%

    I currently have Pulsed Media seedbox, which has SSH access (no root) and docker, haven't tried something like plex/jelyfin so I can't tell how well it works.

    • You should google the name if you want to try them, negative things pops up.

    • Password authentication can't be turned off for SSH.

    2
  • A few questions about selfhosting from a newbie
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 100%

    some sort of dashboard with monitoring and statuses of all my services

    See if Uptime Kuma suits your needs.

    Are there any major no-no things a newbie might do with Docker/selfhosting that I should avoid?

    Allow password based SSH authentication, you should look into key based authentication

    I wanted to have it behind a domain, how would I achieve it?

    Use a reverse proxy (like caddy) which serves different content based on domain name.

    8
  • Thunderbird 115 - odd lack of packaged options beginning to raise eyebrows?
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearAX
    axzxc1236
    1y ago 100%

    I think thunderbird always delay major version upgrade until <version>.2.

    If you observe their changelog:

    115.0: only offer binary download, not as upgrade

    102.0: only offer binary download, not as upgrade

    102.1.2: only offer binary download, not as upgrade

    102.2: no such disclaimer

    They also has the same disclaimer for 91.x, that's how Thunderbird decided to distribute update.

    5
  • I only know about [CVE-2013-3900](https://msrc.microsoft.com/update-guide/vulnerability/CVE-2013-3900) (WinVerifyTrust) which allows modified files to pass signature check unless you tweak registry to enable patches. I think there must be other instances like this where Microsoft won’t fix vulnerability or chooses insecure defaults, is there a list?

    12
    7

    This is a copy of my comment from Reddit. --- My Linux distro is EndeavourOS (Arch Linux but installed with graphical installer), I installed pcsx2-git from AUR which currently provides version 1.7.4282.r0.g6d7eceb4f-1, I will give a rundown on what I did to get P3F Community Enhancement Pack on Linux. 1. Get a Windows system (P3F Community Enhancement Pack requires that) 2. Follow P3F Community Enhancement Pack's installation instruction step by step. 3. Boot back to Linux and mount whatever disk partition that has `P3F Mods` folder. 4. Rename your old PCSX2 config directory **if you already played for a while** (`~/.config/PCSX2` to `~/.config/PCSX2.bak`) (In Linux "~" equals to /home/<your username>) 5. run pcsx2 once and close it to generate default config folder. 6. Copy everything under `P3F Mods/Files` to `~/.config/PCSX2`. 7. Copy `P3F Mods/.PCSX2/inis` to `~/.config/PCSX2` and override original inis directory. 8. Open `~/.config/PCSX2/inis/PCSX2.ini` with any text editor. 9. remove all occurrences of `..\Files\`. (for example, `Bios = ..\Files\bios` becomes `Bios = bios`) 10. change `Snapshots = ..\Notes\snaps` to `Snapshots = snaps` and "Logs = ..\Logs\logs" to "Logs = logs" 11. save PCSX2.ini and close text editor. 12. open a terminal (a program which lets you do Linux commands) 13. do `cd ~/.config/PCSX2` 14. do `pcsx2-qt -elf elf/SLUS_216.21.ELF -batch -fastboot -nofullscreen -- iso/P3F.iso` 15. Does the game run? Did you see "P3F CEP" logo? (I hope it work for you too.) 16. To restore old save, copy memcards folder from `~/.config/PCSX2.bak`. 17 To quickly launch p3f, you can put a function under ~/.bashrc function p3f() { cd ~/.config/PCSX2 pcsx2-qt -elf elf/SLUS_216.21.ELF -batch -fastboot -nofullscreen -- iso/P3F.iso } then you can just type "p3f" to launch p3f.

    5
    1
    gitlab.freedesktop.org

    Phoenix article https://www.phoronix.com/news/Avoid-Nouveau-Linux-6.3

    11
    0

    I keep seeing "502 Bad Gateway" when trying to browse lemmy.ml, and after turning on proxy in my browser it works instantly, after a few tests it seems that lemmy.ml has issues with IPV6. Two curl commands shows very different result for me. ![](https://lemmy.world/pictrs/image/e3ba498b-e9bb-4b4d-97fc-db9832769a57.png)

    29
    3